Recent content by Hans5546

Same with my OnePlus One and Android 7.1.2: FPV and Goggle-Mode are working now :) Had no issues to fly up to 60m (did not try higher) with stable wireless connection in an buildup area with a lot of wifi networks and nearly no video problems. I am still flying with Firmware 1.1.2/ ESC 1.0.3/...

I have no problem with wifi range on Nougat or on Android 5 - only with never firmwares I had bad wifi range. That is why I use an older firmware ;-) I can fly into the geofence with livestream - but most of the time only in goggles mode and not fpv mode when using the controller.Or is control...

No. It is definetly not the firmware but the app. I updated from Android 5 to 7 without changing anything in my Breeze and FPV stopped working. I have to start the app several times. I am using a F firmware (Europe/ Germany).

Same for me. On Android 5 everything, in Android 7.1 fpv not. I have to use goggle mode. Or Start the APP about 10 times. So no difference to the update from last week ...

I installed it and it forced me again to update my Breeze. With my workaround above you can again disable the update (and maybe dont get into the trouble with the reduced camera view). But I did not try the APP with flying. With the last update everything (expect fpv on Nougat) worked without a...

Sure: <?xml version='1.0' encoding='utf-8' standalone='yes' ?> <map> <int name="gamesir_forbidden" value="2" /> <long name="gamesir_lastTime" value="1492509536069" /> <string name="gamesir_gamesirlist">[{&quot;driveName&quot;:&quot;Usb Joystick Usb...

There is a gamstar_config.XML in the yuneec breeze folder in Android. It is located unter root/data/data/...flyingcam/shared_prefs/. Maybe this is the solution? In the same folder you can disable the forced auto update of the breeze with the new APP. It is located in Version.XML and named...

Which firmware have you got? Is is another link than in my post before... With "my" link above I got 2.0.4 (which also works great) - what did you get?

The Breeze was always on 5.8Ghz and never on 2.4! They only changed the channel. 30m was a problem with a former firmware, I also had it. Now I can fly into the geofence. But as nobody seems to be interested in the really good working 2.0.4 linked above: happy waiting for your update inside the...

Here: yuneecpilots.com/threads/modify-the-default-wifi-channel.6910 Is the solution for an offline update and a way how to install it. I got the 2.0.4 from the link in the topic. http://download.yuneec.com/Breeze/firmware.bin The download works. I will not try a newer Firmware as the 2.0.4...

You habe to disconnect wifi from the Breeze (turn it of). Start the APP and click on update. It will download the update. Connect to the Breeze again and update it. I would not update the 2.0.4 - it is the best Firmware I tried!! I can fly up to 80m and 100m away with working Video. Former...

No - the specs say max speed of the drone is 5 m/s! I flew the Breeze at max 30 km/h Wind speed (18 mph, 8,33m/s) and it worked fine! The 5 m/s is ground speed and limited by the Software - the Breeze could fly faster but is not allowed to by Yuneec...

Same in OnePlus One with Android 7.1.1 Googles mode ia working, FPV mode restarts the APP. When starting in Googles mode and pushing L2 in the controller, the APP freezes. I am using the newest veraio 1.1.9... I will try another phone I think. I was planning to mod my Cubot X9 with an external...

I also had this for two times. I just pushed the battery a bit more into the charger and it started charging

Be careful with the provided firmware in the APP update! After updating to 2.0.10, the Wifi channel changed from 36 to 48, after clicking on "Indoor". I tried " Outdoor" after that an no device could see the breeze any more!!! I tried: OnePlus One, Cubot X8, Nexus 7, Samsung S3 and IPad Air 2...