Recent content by kohle65

Always the pilot. Nobody consider it's a drone failure ? I think Yuneec is repairing more drones than selling .

It's a good question. So it should be in the documentation of yuneec, but it isn't. I think you can't do nothing and say goodbye. Once the wizzard had no battery anymore, my typhoon returned to the last point where it had a connection. But this is no flyaway.

Sometimes I have similar problems , loosing contact getting contact again and so on. It can be at a distance of 30m or 500m. In this time my typhoon h is doing strange things. What helped in my case was: calibration of compass once at a flight day. Second, if something get strange, I start...

Mabybe a way is to ask the yuneec support, what to do. A flyaway can be a dangerous thing.

When you are flying Its normal that the lipos are getting hot. They should not get hotter than 60cel. You should invest into a professional charger To see the state of every cell after charging and more. My battery swollen after charging it when it was still hot after a flight. You must wait...

I had the same problem. First it didn't go up after it didn't go down. So I switched the button about 20 times. Up down , up down. After a while it worked again.

I think the same. It could happen with the crash. I would check the flight logs.

I think you should return it to yuneec for a check. Yes, you can fly until the first warning. This is what yuneec support says. It's not the idea to look permanently on the voltage this must be calculated from the st16 Minimum flight time until the first warning should be about 15min. After...

I use a 3d printed tray with 8000mh multistar Battery. Flight time is up to 22min until the first warning appears. New battery after 3 loading circles. My yuneec batteries have a flight time From about 15min until the first warning appears

how it can be that the 5400 and the 7000 have the same flight time ? 7000mah is not correct or the 5400mah is not correct ? The difference should be min 3 minutes.

Hi, I bought my my Typhoon h in Germany. The firmware was with an (e) I went to Brasil with the copter to Brasil and made a firmware update. Now it says (a) after the gimpal firmware.

Filmed with Yuneec Typhoon H pro Realsense, ND 8, ISO 100, 1/250 shutterspeed.