I had a mild crash, my Breeze brushed a bush and crashed from maybe 6-8 feet. After that, no go. Infra red sensor error message and red IRS icon. It would simply not start the motors.
Not much info via searches, but I did desolder the top 4 pins on the IRS board, resoldered and then soldered below that board where 2 of them were accessible with a pencil solder tip and added some solder there. They were not in contact and loose. It worked!
Advice. Use the smallest soldering device you can find and get some magnification for this work and lots of light.
Straighten up & fly right!
Not much info via searches, but I did desolder the top 4 pins on the IRS board, resoldered and then soldered below that board where 2 of them were accessible with a pencil solder tip and added some solder there. They were not in contact and loose. It worked!
Advice. Use the smallest soldering device you can find and get some magnification for this work and lots of light.
Straighten up & fly right!