Welcome to YuneecPilots.com!

Sign up and join the fastest growing Yuneec drone community.

  1. BlackHat01

    Joined:
    Jul 28, 2016
    Messages:
    13
    Likes Received:
    3
    I just did the updates to the camera and to the controller, and after that it's not connecting with the camera anymore. It's more then 20 minutes already since controller is trying. Any suggestions?
     
  2. BlackHat01

    Joined:
    Jul 28, 2016
    Messages:
    13
    Likes Received:
    3
    I have reinstalled the update on controller, and still no connection; on the H I can't reinstall since they are not connected. It seems that the controller and the H can't connect over wi-fi. Anyone could help with a thought?
     
  3. Graham

    Joined:
    May 19, 2016
    Messages:
    210
    Likes Received:
    86
  4. BlackHat01

    Joined:
    Jul 28, 2016
    Messages:
    13
    Likes Received:
    3
    The binding works only on camera. the H does not appear on the list- I hit refresh many times
     
  5. BobW55

    BobW55 Moderator
    Staff Member

    Joined:
    May 10, 2016
    Messages:
    1,058
    Likes Received:
    406
    Location:
    Melvin Michigan, In the thumb
    You have to tilt the H forward about 45 degrees to put the H into bind mode.
    Then hit refresh on the ST-16 screen, it will show up in the list then.
     
  6. BlackHat01

    Joined:
    Jul 28, 2016
    Messages:
    13
    Likes Received:
    3
    It's fine now. Thank you very much for your help