Recent content by chiefrocka

My cg03 wont pitch up or down when plugged into the Airframe but works just fine when its hooked into the steadygrip, any help is appeciated

Esc's and motors are good. I calibrated accelerometer but it won't let me do the compass calibrate even though it says the compass is green(good). ? I don't know. I really want to figure this out just in case it happens again or I might be able to help someone later. Well, if you have any...

Put in a new motherboard, but something is wrong. When I turn on the power it starts to beep and the light beneath flashes a long green light followed by flashing orange, any ideas on this one ?

Do you still have the drone for sell?

Thank you very much. I guess my soldering skills suck! lol Also, on my main mother board the started to smoke from the middle black component so I know that's gone. Question is do I have to replace the whole mother board or can I have just that one piece replaced?

Does anyone know if all wires (red,blue,black) coming from the motors into the ESC, are they all hooked up the same? Do they all go: RED - A, BLUE - B, BLACK - C?

I tried connecting to the bird using the braided wire and also on the steady grip. It does the same thing on both which is panning left and right non-stop. The camera works, well at least I get a picture from it but for some reason it won't stop going from side to side on the gimbal.

well that didn't work, but thanks for your help I really appreciate it. Any suggestions on what to do now?

What exactly doe the cog symbol look like? Ive touched everything and i'm still not able to get a menu to reset the camera.

where at is the reset button for the camera to recalibrate? Am I missing something, I can't seem to find it.

where at exactly is the reset in on the ST+10? Which settings?

You actually don't need those 3 wires. Your drone should have came with an extra black braided wire that connects to the back of the camera and into the bottom of the drone. The 3 wires that are disconnected from the camera I would just set them aside make sure they don't touch anything a...

Since I crashed my q500 4k when I plug the camera into the drone it starts to whip side to side while making a beeping sound. Obviously the crash did something to it. I was wondering if you had any idea would could be causing this and/or how to possibly fix it before I have to send it in for...

How do you calibrate the CGO3? I just had a crash and I know that it's going to need to be recalibrated. I was also wondering if anyone has a FPV range extender mod for their ST10+ for their Q500 4K and if so how much more distance can you get vertically and horizontally? Also, is it worth the price

Ok, thank you very much for the info.