Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

DCH's latest activity

  • DCH
    DCH reacted to h-elsner's post in the thread Motor problem with Like Like.
    log 00025: at 20240412 12:09:44:459 motor_status changes from 255 (OK) to 253 (Motor 2 fail) midflight log 00026: at 20240412...
  • DCH
    DCH reacted to h-elsner's post in the thread Motor problem with Like Like.
    Sounds like it goes to 5-rotor mode. You can check if some debries are between motor outrunner and magnets and remove them if so. In the...
  • DCH
    DCH reacted to Steve Carr's post in the thread Typhoon H3 Crash (Help)! with Like Like.
    You could send it up to Sacramento for repair. That's the only way you can be sure it will be repaired properly.
  • DCH
    DCH reacted to h-elsner's post in the thread Typhoon H3 Crash (Help)! with Like Like.
    The drone itself is easy to repair. It is modular and parts can be changed, and the best, parts are available. Parts from Typhoon H Plus...
  • DCH
    DCH reacted to h-elsner's post in the thread Camera mount buffer pins with Like Like.
    I use small cable ties (zip tie) to replace the pins. You need two for one pin and two plastic washer. Attach one washer below, zip-tie...
  • DCH
    DCH reacted to DoomMeister's post in the thread Camera mount buffer pins with Like Like.
    They have always been just the two and they mount in opposite corners. Either front right/rear left or front left/rear right. They help...
  • DCH
    DCH reacted to Yuneec Skins's post in the thread Typhoon H MG Chemicals Silicone Conformal Coating advice with Like Like.
    In my opinion, it's a waste of time... 1st it may cause some components to overheat... 2nd it won't work for the Motors, Retract...
  • DCH
    DCH reacted to Steve Carr's post in the thread email / registration with Like Like.
    There is no reason to add an email address to the controller. The ST16s should only be used for flight control. Never add any apps...
Show older items