Recent content by DurianFlyer

First warning? 4.3v 2nd warning? 4.1v Duration between 1st and 2nd warning? Too short to even say 'Oh sh*t!' At 15v the H is just 50ft out. At 14.8v should be over the pad preparing to land. At my location it's really hard to shop for spare parts, prevention is better than repair.

Start this off with a very big Sorry to JH... Got the tower months back and up to now I still haven't installed it yet... Too busy with work and life... Heck, I last flown the H November 26th, and haven't touched her again, just the Batts to monitor their storage levels... I promised JH a...

So what are you guys waiting for? Order now! Hehe

Brain fart moment.... That question kept bugging me but kept forgetting to put the query in.... Then when he posted the reply I remembered that pending question so I just browsed his post then jumped down to type in my reply... Must have skipped that part 1 and a half inch from the end hahahaha...

Why not just charge the st16 using a USB charger? Reduces wear and tear on the battery connectors. Usually takes the same time to reach full charge as 2 H batteries from storage to full.

One quick question John Hennessey... Is the rig easy to detach for transport or storage? Kinda hard to load an H with a chimney on to the backpack...

Yep, that's the 10 month old battery... I got the H slightly used, so I don't know how good the storage routine of the previous owner was, but I did notice a shorter flight time compared to the new Ultrax. So I just used that batt for preflights and adjusting camera settings, then short low...

So you had the two H's for nearly 2 years... Are you still using the same batteries? If so, how are the batteries? Could it have degraded already? Like here in the screenshot, chA is a 3 month old Ultrax while chB is a 10 month old stock batt. At storage level the Ultrax registered 800+mah while...

1 Ultrax was alteady at storage level, so proceeded to bring the other 2 to storage level as well. Using the charger's interface is easy enough, set to storage, set A at 6.3, then start. After that, I tried the app and since it's already charging, showed me the display to monitor the process...

Not intending to hijack, but we share the same topic. Just got my d100 v2 and using it now to balance/store my 3 batteries. Initial readout before starting... 1 stock battery at 10 months old, and 2 Ultrax about 3 months, 3 cycles old.

Whoa... Talk about the cooling factor! Here in the islands 36C is your everyday posted temp, with feels like up towards 38C. Which is why I don't fly beyond 9am or before 5pm. Don't want to prove that the H will fail if outside temp is at or near 40C, because surely the internal Temps would be...

Would love to take that black beauty for a spin or twenty... Your choice which one

Are all knobs and dials centered before calibration? I calibrated the camera but dial is full up and the knob is not centered. After calibration the camera settled on a 45 degree angle, and it won't tilt up and centered when flicked to follow mode. Realized I may have made a mistake during...

Any update on when it will be available? I really wanted to tell John Hennessey to...

It's alive! And airborne! Thanks to all those who contributed to these forum, who shared their knowledge, experience and insights regarding the H. Any mistakes are solely mine, like after replacing the gimbal top mount you have to do a camera calibration. I did it, but forgot to center the...