Recent content by Khel72

No problem I'm working right now anyway. Nothing of note has happened recently, no hard landings, no crashes, etc. Just had camera connection issues and then control connection issues started as well

im like a blind man trying to understand these but going back over previous flights it looks like im having some calibration issues as well?

Okay here's where I'm at. The guy I know sold his q so can't use a second controller to test. Looked up telemetry in flight log evaluation program and a whole lot of red. Fsk column is reading -70's to -90's in part and -30 to -40's in others Fmod is at 13 and 16 during flight Have no clue what...

Cg03 camera. Same place I fly all the time so that shouldn't be a problem. Used to not lose any video signal flying 800-1000 ft away. Only mod is the rakon heli frame but I did that a few months ago and hadn't had any problems until lately. Will be able to do your suggested testing tomorrow...

I know someone with a q that I can try their transmitter. I was just thinking with both the camera and control signal going out that might be it. Would the wifi board or camera antenna have anything to do with the control of the Q itself?

I've recently been having issues with losing camera connection at around 400-500 ft from transmitter and last night it lost connection all together. Got it back in home mode okay. Seeing as how it uses 2 different antennas would it be a transmitter issue? Is there a way to test it and know for...

Changed out the esc and all is well now. Thanks

I made sure there was no debris in the motor, tried to turn the prop while holding motor and that was fine. Started with no props and still just ran a bit slower so I'm guessing the esc is starting to go. I'll get one ordered and hopefully that will fix it up. Weird that I just did a calibration...

So I went to go fly this morning, got all set up, and turned motors on. Right away I have some noticable vibration and my left front motor is turning at a slower rate than other 3 so I shut it down immediately. Gui says everything is fine but I'm thinking that if you can visually see one is not...

Also on tonight's flight i had 9 sats on the st10 and 16 on the Q

Took the Q up to film some fireworks and was about 250ft up and 400ft out just hovering. Lost connection pops up on the screen and sure enough no stick control for around 30-40 seconds then got it back. This is the second time it's happened, with about 10ish flights in between. First 300ft up...

All my batteries are the gifi 7500mah from Carolina drones

It's much easier than I thought it was going to be.i have no experience with these things and did the rakon in about 2-3 hours

$229 for the full kit. Is it worth it? I think so, it's a really solid kit when built. Plus if I were to crAsh and break an arm I now just need to replace the arm and not a complete airframe