Recent content by Miguel Gonçalves

Its basically gopro4 black footage! The gimball works great All my footage is captured at max res: 4K@30fps Here's some examples: Second flight edit with some parts At 4x speed and still steady Raw from my first flight You can check more on my channel

Has I have already mentioned, this was not the complete logs of this battery... I did a first take off for a couple of minutes and then landed after noticing I didn't started recording due to lack of sd card. My typhoon G does vibrate in time to warn me of lower voltage. And warns to low to 60m...

Someone sent me this picture...

you nailed it. 14.3V was when it dropped. never even felt the rumble, because it lost the signal on that moment and crash landed

I did a first flight before, just returned home to land and took off again to the flight you see on the logs. ;) The command wasn't even turned of between flights. so the read was suppose to be real and not an estimate. I've started the first flight with a full battery

I own a G since April 26 and never had a single issue with it! Running with gopro hero 4 black. The only thing annoying is not showing any image when you are doing time lapse video on the gopro. Could at least capture frames from time to time.

camera is back on :) Thanks again for the tip! i'll test it in a few hours to see if everything is ok. meanwhile i've found the logs and took some pictures of it. Voltage was a bit over 14v when it dropped. Last registered line was with altitude of 93m... After getting the drone from the...

probably it's not 14V, but i'll check in the logs in the morning ;)

Thanks! Checking right now if it will help solve the issue :p

Long story short.... Started from a valley and climbed up to 120m. went to the top of the small mountain were it's a church and a castle to do some aerial filming and photography... The battery was above half and with 14v at least displaying on the controller screen. When suddenly the drone...