Recent content by MobileTechSpecialists

I’ll send a pm with a very generalized version of what’s going on

Thank you for checking I really appreciate your contributions

Are you able to contact me regarding a customers H600? I just have some questions he has and I don’t have the answer, I also have some questions about troubleshooting if you’re able to help. I can send a PM?

I guess I should ask this first, did you ever figure it out?

I saw this, I couldn’t find any info. I’m going to use an ESP32 to capture the WiFi handshake and see if it’s possible to crack using a wordlist…

little late, but i did decompile the GUI and bootloader, this should be possible in theory. https://github.com/opsecfreak/TyphoonHGUI-Decompiled

I feel like an H+ could be modified to handle light rain/snow. The problem arises when you look at what prolonged or even short term exposure to damp, humid climates will do to the exposed electronics, or electronics that aren't sealed 100%. The H600 has an IP rating, the look/design of the...

I have a customers H600 here, I have some questions regarding firmware, and some ways to keep this drone flying as long as possible for the customer. If you have a moment to chat at some point please let me know!! - Alex

thats nasty work. Ive seen this happen and ive noticed as soon as QGC downloads parameters, the drone changes the way it broadcasts mavlink packets, and then firmware, everything will not be recognized. I am working on a solution for this, theres many people who download it on their ST-16 and...

Say I replace an encoder, do I need to wipe the values or can I use the CGO3P calibration tool as stated above? I have about 6 cameras I’m in the process of restoring it’s slowing things down big time

If this is a problem you’re still dealing with I have continued a lot of John’s work, especially making some big strides with the 520/520E. Feel free to contact me if you need any help or parts!!

On the 520/520e are there any easy 3.7v or 5v pins to break off from? Maybe the usb?

Also, they have the potential to spin super fast and become plastic shrapnel, don’t ask me how I know. I was using PLA+ with 100% infill, it’s not worth the risk in my opinion. They kinda blow up under high RPM

I was using the ESP32 with micropython to work as a serial monitor when first looking at your CGO3+ calibration software, ended up using a raspberry pi with better results

I did notice this, however given the h600’s plan for third party payloads etc I’m assuming the E90x wouldn’t have the same waterproof rating as the drone, however it’s pretty misleading. This tells me the e90x is probably not the same as the h600 in terms IP rating, they actually don’t list any...