Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Recent content by paternoster

  1. paternoster

    H520 Startup Issue

    If i haven't managed to frie my own cells too much I'd say QGroundControl should be able to connect with H520 and fetch the logs exactly without a camera hanging on and without a battery in H520. Have done that and if remembered wrong I should get taken in somewhere where they don't let anyone...
  2. paternoster

    E90 Fix for Gimbal Vibration

    The old one might well be damaged like this or any other way, but if the new E90 suffers for these reasons damage has been most likely done before it got on my hands. I haven't done accelometer/gyro calibrations at all with it since it feels and sounds sickening when the gimbal is fighting...
  3. paternoster

    E90 Fix for Gimbal Vibration

    Yes, that is correct. The first camera is the one which did sat on a pine branch and it does start spinning instantly when powered on, despite several resets and different firmwares tested. It can stay without spinning if kept in place when power is put on; however there is no control working...
  4. paternoster

    E90 Fix for Gimbal Vibration

    I did wrote about this odd behaviour earlier this year here in two consecutive posts. This time I went with good hopes to do some roof inspections again. When I was almost ready to bring H520 down from first flight to cahnge the battery the reality did strike again. E90 spinning wildly with...
  5. paternoster

    E90 Fix for Gimbal Vibration

    Oh, (expletive deleted), I'd like to come here with something good to tell but you guess how it is. I have had good times with this bird and have done good results with it but lately things have been going rather sour. Decided to try this gimbal fix and here is the outcome; anyone else?
  6. paternoster

    Hello, Tintin, is there anyone in the E90?

    These two schwitches are under the same lid where are usb port and sdcard. You need couple quite small pins to push them simultaneously when power is on. There are logs on ST16 and logs on H520. At least I can tell you that if you pull logs from H520 with QGroundcontrol there is an option to...
  7. paternoster

    Hello, Tintin, is there anyone in the E90?

    Ok, time to update some news from the haunted Cameras -section. I haven't been flying almost at all since october, just a few short shoots, everything has worked fine. Last friday I decided to go and do some roof inspections which have been pending for some time already, either I have had much...
  8. paternoster

    Hello, Tintin, is there anyone in the E90?

    Well, claudius62 , it may well be your E90 isn't haunted. It might just be a feature amongst others. I got our H520 back about a week ago, with a new E90 hence the old one just was beyond all help, or that's how they did put it in at the local dealer. I haven't been able to test it ouside due...
  9. paternoster

    New update for H520 version 1.6.18

    Hm, maybe I should back off a little with my accusations considering this last software update. Did some testing yesterday and the fault is definitely in E90 gimbal. CGOET works fine and H520 flies as it should. I can prevent E90 from spinning as wild as ahown above just by grabbing ity before...
  10. paternoster

    New update for H520 version 1.6.18

    Bugger. I've been deliberately away from here for a while, have flown our H520 last time somewere in the beginning of june. Everything worked well then and before that. Now it started to feel like there might be some spare time to use fiddling with it. I updated everything, went ok, thus it...
  11. paternoster

    ST16S controls unresponsive after using UAV Pilot flight sim

    I have been trying to find where I saw the explanation for these lights but no avail so far. Still confident that it is normal. And yes I am in charge of deploying a H520. Its not my own but I am operating with it since someone somewhere decided 'you guys need one and you will be the one to...
  12. paternoster

    ST16S controls unresponsive after using UAV Pilot flight sim

    Lights should be on on every H520. I can't remember where I've seen the explanation but if i remember correct that light is a signal of in which state the H520 is on considering is it ready to be connected with the ST16.
  13. paternoster

    H520 Mapping Accuracy

    I've used 45 and 60 degrees, something like 60 deg might be safer if you shoot higher and/or you shoot in a place with much vertical differences. This because you don't want the horizon to get into your shots. What comes to accuracy of results those differences in angles haven't made difference...
  14. paternoster

    HOW TO: HOW TO USE THE "R.O.I" IN MANUAL FLIGHT

    Okey, first things first, a big thank you for both #claudius62 and #arruntus, what a great feature to be found despite we lived a moment in belief it might have been too much asked from these equipment. I managed to do some flying and had opportunity to test and results are satisfying. I got it...
  15. paternoster

    H520 Mapping Accuracy

    First thing I can tell what doesn't much make difference in the result is that you make the H520 to stop with every picture. It is just a waste of batterylife, better let it fly but just in a moderate speed. I have been testing mapping capabilities with H520 & E90 and I am getting into a...