Recent content by Peau Productions

So you would prefer thread tape holding the lens in instead of a drop of glue? The tape provides a very secure hold, should never vibrate out of focus, but does allow the user to tweak the focus or swap to a different lens should they desire it.

Should work fine for photogrammetry. You can see a 3D model we created with this lens in a GoPro flown on a 3DR SOLO here: PeauPro41 - Peau Office [Nadir Only Images]

We've gone through many revisions of the lens to make sure it's the best it can be, so we appreciate the patience of those that pre-ordered it. Know that the example media you've seen thus far has been from pre-production lenses and the final design is further improved. We are doing are best to...

Just posted some raw DNG files HERE to download. No filter on the camera, two folders: auto and manual exposure.

Yes, $290 for lens+labor. You can buy the lens and mount ($140+$10) and do the install yourself if you don't want to send the camera to us. We also sell new modified cameras for $800. As far as hefty shipping charges, shipping is free for all orders over $100, and it will be delivered via DHL...

No glue is needed, just use some Teflon thread tape, one layer is usually enough to provide a secure fit. We use a chiseled soldering iron to make notches in the corners of the lens mount so we can get a flat blade under to pop the lens mount off. That's the best method we've found with the...

Yes you can use the threaded mount we sell to install other m12x0.5 lenses. The stock lens is still threaded as far as we know even if the new black lens mounts are not, so you should be able to break the glue and thread it into the new mount.

Sorry about that, link was just fixed. We'll work on getting the unedited photos up asap.

Typically Adobe Photoshop

Yes all images above are post processed. We'll reply to your email asap, thanks.

This 8.25mm lens is far sharper than the stock original lens. I believe what you're asking about is pixel blur, which relates to making sure your shutter speed is fast enough so that the pixels are sharp and not blurred. For photos this is not typically an issue since the shutter speeds are much...

The 8.25mm is over a 2x zoom compared to the stock CGO3+/CGO3 lens, and was designed to be exactly a 2x compared to our 3.97mm (82 degree HFOV vs 41 degrees HFOV). It has improved overall sharpness, reduced chromatic abberation and very little lens flare. If you can even get it to flare, it will...

Correct, many of the new cameras do not have threaded mounts. It's easy to identify as the older grey mounts have threads and the black ones do not. You can see some photos of the non-threaded black mounts on our replacement lens mount ordering page. The issue though is that these m12 lenses...

Exactly

That's because the lenses you're buying/seeing are meant for a specific platform (camera body) which the lens manufacture knows the sensor's megapixel, so the lens is designed as such. So, for instance with this 8.25mm lens, when we say it's 16 megapixel (MP) and is designed for a 1/2.3" sized...