Stephen1988's latest activity
-
The accelerometer calibration is tricky. I touch the landing gear against something like the computer screen or a wall to steady the... -
QGC may be an option to get the IMU calibrated. Not sure if the H3/H+/H520 can connect using USB, but I think they are able to unlike...
-
Stephen1988 replied to the thread H520 landing gear problem.The answer to this thread is a setting for the bumper cage . When enabled the landing gear stays in its down position. The answer was...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Here is a picture of messages after failed accelerometer. When I mentioned above no error messages i meant i didn’t see any in red ...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Sd card removed and formatted to fat 32 again. GPS lock achieved and arms stay solid purple in angle mode. I could not achieve this with...
-
Stephen1988 reacted to Steve Carr's post in the thread DB2 Laquinta, Multispectral User Manual with
Like.
I spent a lot of time trying to find the manual and came up with nothing. This is all I found for downloads: https://us.yuneec.com/download/ -
Stephen1988 replied to the thread H520 to h3 conversion.See here sd card removed, seller must have taught an 8gb sd card was too hard to part with so it wasn’t included in the sale. I replaced...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Yes luckily it did have an Imu fitted . It was listed as a typhoon h mainboard but the presence of the h3 style battery connector and...
-
-
Yes, you can use both if the plugs fit.
-
Stephen1988 replied to the thread H520 to h3 conversion.Motors will arm when aircraft gps is toggled on under other settings but this setting is likely just another name for indoor mode or to...
-
Stephen1988 replied to the thread H520 to h3 conversion.Failure to launch 🚀. I’ve tried the same trick as the hplus where a blank sd card was installed in the mainboard. The used h3 mainboard...
-
Stephen1988 replied to the thread Hplus h520 parts.Excellent, I must try a h480 module on a hplus just out of curiosity. Just to see is the module physically compatible in size and...
-
Stephen1988 replied to the thread H520 to h3 conversion.Thank you. After a long wait for a h520e shell to complete this h3 conversion it’s now ready for its maiden flight. H520e shell just for...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Are these 2 sr24 boards the same. One is from h3 and one h520. Also can I just remove the realsence wire that was fitted to the h520 as...
-
-
Stephen1988 replied to the thread 10th anniversary Yuneec mania.It’s all very exciting, looking forward to future information. Thank you Enrico. Wishing all the best for success
