Stephen1988's latest activity
-
Stephen1988 replied to the thread H520 to h3 conversion.I tried the compass calibration again after the success on pc just via the controller. It failed again. I finally figured out what was... -
Stephen1988 replied to the thread H520 to h3 conversion.Does this look normal?
-
Stephen1988 replied to the thread H520 to h3 conversion.All completed successfully using this method. I’ll upload a video of hi res imu. I don’t understand any of it currently. It’s all new to me
-
-
Stephen1988 replied to the thread H520 to h3 conversion.I’ll add some pictures as soon as I can . Thank you
-
Usually one can access to the filesystem on the SD card using QGC > Analyze Tools > MAVlink Console. But all the Yuneec drones based on...
-
SYS status and many other thing we can also see in the TLOG files at the ST16 just occurred to me.
-
Stephen1988 replied to the thread H520 to h3 conversion.I see ur note at the end(Note: Never clear or change parameter in GGC nor update firmware with it. Calibration should possible but I...
-
Stephen1988 replied to the thread H520 to h3 conversion.Thank you for the detailed explanation, this will be the next on the testing list. The files shown here are what are present on the sd...
-
Stephen1988 replied to the thread H520 to h3 conversion.In the meantime I’ll try a software update tonight if it’s not already on the latest. After updating I’ll give the accelerometer another...
-
The accelerometer calibration is tricky. I touch the landing gear against something like the computer screen or a wall to steady the...
-
QGC may be an option to get the IMU calibrated. Not sure if the H3/H+/H520 can connect using USB, but I think they are able to unlike...
-
Stephen1988 replied to the thread H520 landing gear problem.The answer to this thread is a setting for the bumper cage . When enabled the landing gear stays in its down position. The answer was...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Here is a picture of messages after failed accelerometer. When I mentioned above no error messages i meant i didn’t see any in red ...
-
-
Stephen1988 replied to the thread H520 to h3 conversion.Sd card removed and formatted to fat 32 again. GPS lock achieved and arms stay solid purple in angle mode. I could not achieve this with...
-
Stephen1988 reacted to Steve Carr's post in the thread DB2 Laquinta, Multispectral User Manual with
Like.
I spent a lot of time trying to find the manual and came up with nothing. This is all I found for downloads: https://us.yuneec.com/download/
