Recent content by Treb

I was thinking of two white on the front legs buried into the foam and two red at the rear mounted similarly. Or possibly 3d printed mounts, I would like to try still to keep them at the end of the legs though.

Hi, I'm thinking of selling my TH Pro combo, why you may well ask? Well I love the way it fly's and the cool look especially the retracts however it is a little small for my needs. I'm much more into the flying than the filming and only fly LOS'I have built a couple of large Pixhawk airframes...

Hi I have come across one thread that would suggest on the older cg03 there is a weight in the rear pivot on the gimbal that can be turned to 'tune' the weight balance.? Not at home for a coupe of days but will have a good look there on Friday

Hi will try calibrating with an offset tomorrow and see if we get an aceptable result. I am a little concerned about the sudden shift whilst flying though as this is more than 30degs'. Do you think this maybee down to faulty connections in the slider plate? or something moving in the gimbal...

Hi Cap, Can you see it now ?

Ok so after many gimbal recalibrations, rebinding and recalibration I still have a tilting on my gimbal about 2 degs' It has been there since day one so doesn't seem to be influenced by the firmware updates, attached photo was taken just after a gimbal calibration without moving the drone the...

Hi Greg many thanks for that explination. The firmware I have is the latest EU varient downloaded yesteray I checked after update and the Autopilot was changed to 1.27 if I recall. I was trying out all the modes possible inculding RTH and everything seemed ok and 'locked in' and I agree a 1...

Hi, It would appear that on a 16min flight I had two issues, Code 1 which I think is the low battery warning at the end so no problems as it worked fine with 20% left in the battery Code 32 compass calibration for about 1 second. I have loaded the Telemetry files into Exmaps and it shows a...

If the calibration has been successful, all the LED status indicators will blink continuously, the Main LED Status Indicator will be solid green and the flight controller restarts, you will recognize this when you hear the acknowledgement tone, the same one you hear when you switch the system...

There is a light sequence of the status leds and finally a reboot of the H. If it ends in a white light I believe it has failed and should be done again. I have tried fast turns, slow turns, pause between rotations to see if lights stop flashing, what I found what works for me is two complete...

Ok so just got back from flying the latest firmware on a H Pro. Now I've only flown the H twice before both on different firm wares the first one showed some drift possibly due to my not calibrating the compass correctly the second on 1.26 although flew very well had lots of compass issues on...

Ok so just got back from flying the latest firmware that was downloaded via the direct download link posted earlier. Now I've only flown the H twice before so I cant comment on any positive changes however after calibrating the Accel' and gimbal at my house the Compass Calibration was attempted...

I wonder if they have imposed some country specific limitations, ie download from your own country's site, Just a thought.

Cant connect from the UK, however the download link posted earlier works. Just downloaded and wrote firmware to the H.... will go and have a quick flight this afternoon after all calibrations and see whats what. Question, Does it matter in which order the calibrations are done? I would like to...

'I have yet to see one fly a 8000 multistar over 20 minutes and not melt.' Oh dear Ralphy, If temps' in the battery bay are hot enough to melt any or all of the home made ABS trays I've seen that really does not bode well for ANY home made tray. ABS having a glass transition temp off approx...