Another one bites the dust

[Warren g]

Does anyone have a wiring diagram repeat picture of the wiring on the q500

 

[WTFDproject]

That request covers a lot more ground than you might be aware. You can help us by telling us what your are working on, and we will try to find what you need.
A few of the detailed areas are covered in the document attached to "Way To Fix Drones project". Most are in the Q500 Section starting at Attachment 41.

 

[Warren g]

That does me no good .. I have to run it without the camera.. I have the cg03 board.. just need to see a picture of the drone with all it's wired intact..

 

[R G]

I took this picture of my Q500 after unsoldering the power leads to the ESCs, but before unplugging all the peripheral cables. Hope this helps.



RG

 

[Warren g]

I took this picture of my Q500 after unsoldering the power leads to the ESCs, but before unplugging all the peripheral cables. Hope this helps.

View attachment 22976

RG

I got it flying again... Thank you.. now I gust have to run the camera from a direct wire to get it working again.. and thanks for the pictures.