Lost control of camera

[M Keys]

I was flying yesterday and suddenly my camera starting turning on its own and then started shaking uncontrollably I hit return to home and it landed ok but my gimbal is still shaking and I can control the camera.
See attached video at 1:03. Do I need to do a hard reset of the camera?


http://keysfamily.dsmynas.com:5000/vs/sharing/BMfPCmgl#!aG9tZV92aWRlby0xNg==

 

[Guest22]

I would re-sync the camera and perform a gimbal calibration. Have you removed the camera from the "H"? If so, remove and re-seat it. If not, it won't hurt. If that doesn't help, I would contact support.

 

[PatR]

I'd start with a camera removal and re-install, rebind, and then calibrate the gimbal. I've had that happen where all that was needed was a simple shut down and re-start of the system, but re-calibrated to be on the safe side.

 

[M Keys]

I'd start with a camera removal and re-install, rebind, and then calibrate the gimbal. I've had that happen where all that was needed was a simple shut down and re-start of the system, but re-calibrated to be on the safe side.

I will give this a try tomorrow. Thanks