Hi All,
I nearly crapped myself today. Last night I tried connecting the Typhoon H to the GUI on a windows 7 laptop and the GUI kept crashing. So I tried a Windows 10 laptop and with a bit of coaxing, got it all talking. I was doing this with the intention of increasing the altitude and geo fence limit.
All seemed to go well, until this morning I decided to see if the new settings took. So out I go and straight away I get a flashing red light. I turned everything off, reset the battery and tried again. Same issue. I changed the battery, same issue. Between me going up the hall and out into the garden my wife says "Hows the drone hun" I say "Yeah going really well" thinking I had just messed up the flight controller in some way.
On checking here on my phone I see flashing red light -------- Initialization Failure. So put 2 and 2 together and get 40. Then I read down a little further and see that a similar signal can mean the your home switch is turned on. So I checked and sure enough it was on. Panic over. So read your manual and check your switches before flight.
Long story short, the new settings took.
Have a good day everyone.
I nearly crapped myself today. Last night I tried connecting the Typhoon H to the GUI on a windows 7 laptop and the GUI kept crashing. So I tried a Windows 10 laptop and with a bit of coaxing, got it all talking. I was doing this with the intention of increasing the altitude and geo fence limit.
All seemed to go well, until this morning I decided to see if the new settings took. So out I go and straight away I get a flashing red light. I turned everything off, reset the battery and tried again. Same issue. I changed the battery, same issue. Between me going up the hall and out into the garden my wife says "Hows the drone hun" I say "Yeah going really well" thinking I had just messed up the flight controller in some way.
On checking here on my phone I see flashing red light -------- Initialization Failure. So put 2 and 2 together and get 40. Then I read down a little further and see that a similar signal can mean the your home switch is turned on. So I checked and sure enough it was on. Panic over. So read your manual and check your switches before flight.
Long story short, the new settings took.
Have a good day everyone.