Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

ST10+ and J4 problems

Joined
Apr 5, 2016
Messages
97
Reaction score
21
My J4 is stuck on -12 - and the drone is behaving accordingly. I have taken out the right hand control unit and cleaned it with electronics cleaner and electronics compressed gas - no luck. It is now at -13 :)
Short of trying to find a replacement does anyone have any idea what else to do?

Thank you for any input.
 
I would at least swap the plugs between J3 and J4 to ensure it is the pot instead of something else.

NOTE: Don't be surprised if both appear drastically out of calibration when reversed. That's normal.

With J3 and J4 plugs swapped:
When you move the right stick back and forth:
If the J3 indication is "stuck" somewhere, then the actual J4 pot is bad.

When you move the right stick up and down:
If the J4 indication remains "stuck", then both pots are good, and the issue is downstream in the controller somewhere.
 
  • Like
Reactions: WernerJB
Thanks figured it out. A new calibration took care of it. Forgot about the hidden menu [emoji849]
 

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,591
Members
27,287
Latest member
wccannabis