Ok, from start to finish:
I use UAV tool box to plan the mission and exported it as a curved cable cam file.
I would be glad to.
Step 1: I use UAV toolbox to create the mission and export it to a curved cable cam file in the ST16,
I set the mission in a tight grid pattern with the camera facing the ground the whole time (90 degrees from level)
Step 2: I set the camera to burst mode one photo per second and started the mission.
Step 3: Once the mission was complete I uploaded the pictures to my pc (all need to be jpeg only)
(you will only be uploading every other photo to their service so be prepared)
Step 4: Once you have an account setup with
www.mapsmadeeasy.com select New map at the top right
View attachment 17537
Step 5: Select Create Map
View attachment 17538
Step 6: Name your map
then select next
View attachment 17539
Step 7: Select the 3 boxes located at this page (it is vital to have all of the images come from the same camera) then click select images to upload
View attachment 17540
Step 8: Select the images from your PC (I created a folder just for the images and deleted every one so that I could select all of them in the specific folder) select next
Step 9: Test image tag : select one of the photos from your PC to test the location reference for map overlay, select the box at the bottom and click next
View attachment 17541
Step 10: Confirm the images, click next
View attachment 17542
Step 11: Select the last orange box { Normal (1X points) } and select the top option in the box to the right, then select next
View attachment 17543
Step 12: Verify EXIF location, select next
View attachment 17544
Step 13: Select approval box and upload now
View attachment 17545
Step 14: Sit back and wait! Everything else is automated.
Let me know if this is clear or you need more information. I just started exploring this service and will continue to learn how to use it.