Camera is flashing blue and camera is pointed towards blue flashing light.
Sorry aircraft is flaring blue
This is confusing.
If the rear main LED of the aircraft is flashing blue, it means the Q500 itself is not bound to the controller.
If the camera is pointed at the rear Main LED, something is really wrong. The CGo3 normally associated with a Q500 is not capable of pointing towards the rear of the aircraft if it is correctly assembled and mounted.
The first step is confirm you have a Q500 aircraft and a CGo3 camera.
If you do in fact have a Q500/CGo3, you may want to perform the entire binding diagnostics for both aircraft and camera. Please see Attachment 33 (Q500 Binding Verification) of the PDF document attached to
Way To Fix Drones project.
The verification is not just "binding instructions". It is a verification of the MANY hidden clues in the binding process. The purpose is to identify abnormal conditions that are preventing a successful bind and to identify the exact point where the binding process is failing. That information can assist in determining the best course to remedy the problem.
You will need to perform every step up to the point the verification does not match what you see. Do not skip any steps. Every step must be performed. Even the steps you have no doubt are already in the correct condition. After some preparations steps, the verification falls into a routine of directing an action, then verifying the correct response to the action. When you reach a step that does not match what you see, or if you are unsure if it matches, STOP. Report the step number back to the forum, and what you actually saw at that step. We can then go from there.