Hello again fine folks! I have another question about the typhoon H480. I installed a Carolina Dronz 82 Deg FOV (I think it was based on the peau lens as a "knockoff"). I had it dialed in nicely at one point, but over the years and a few light crashes later I am finding it to be out of focus more than I like. I never really found a good way to focus as the lower res output on the ST 16 screen was always slightly fuzzy. Can anyone give me some pointers or procedures to dial in the focus to the optimal point of focus? I used a stop sign and put it out about 20 feet and turned it till I noticed it focus and kept track of how far I turned it till out of focus, then back the opposite direction till it was out of focus again, then split the difference, much like I do on a manual focus camera, but without a clear hi res output I cant tell. Also hard to turn the lens without hand cutting into the shot. As I recall the german installation video stopped short of how to focus it properly. Any help/suggestions would be much appreciated.