Just replaced the air frame and now this

[Robertg4810]

Helping out a friend I gave a q500 4K too
He has changed the air frame
Now it looks like he is getting 3 blinks blue then one yellow
We need some help both are getting frustrated
But we won’t give up
So any help is so greatly appreciated

 

[WTFDproject]

that could MAYBE be two issues:
Blue - Not bound
Yellow - compass not calibrated.

Try binding the Q500 first. If successful, then perform compass calibration.

Do you need any help with either of these?

 

[Robertg4810]

Will not bind have tried several different times
Will not show the serial number on the controller

 

[Steve Carr]

Did you tip the Q forward a few times until you get an orange flashing status light?

 

[Robertg4810]

Yes we did flashing fast still will not bind with the controller

 

[Steve Carr]

Create a new model and then see if you can bind to that new model. Give it a name so you know which one you created.

 

[Robertg4810]

Follow the yuneec video to the tea
Even reset the controller also still won’t bind

 

[Robertg4810]

Have done that also
I am lost big time

 

[h-elsner]

Makes it sound? If yes which one.
Check all cable connection, especially the one to the receiver.
What about the GUI? Do you have access to the Q500 via GUI?

br HE

 

[WTFDproject]

Will not bind have tried several different times
Will not show the serial number on the controller

Please run this binding verification to try to identify the exact problem. It will take a few minutes, but it may help bring the issue to focus:
"Binding Verification - ST10+ / Q500."