- Joined
- Nov 2, 2016
- Messages
- 13
- Reaction score
- 1
- Age
- 59
A while ago, I had a dynamic roll over and damaged an arm. I replaced everything needed and it's been fine since.
Today, the small screw holding the arm clip in place came out. When I tried to replace it with the spare, it just drops inside the arm socket. I've two questions:
1. What are anyones thoughts on using a slightly larger screw? It seems it's there to retain tension on the spring clip and hold it in place.
2. I've read elsewhere that if I fly with the arm slack, the weight of the Typhoon will maintain the arm in position anyway. Is this correct?
Any opinions welcome.
Neill W
Today, the small screw holding the arm clip in place came out. When I tried to replace it with the spare, it just drops inside the arm socket. I've two questions:
1. What are anyones thoughts on using a slightly larger screw? It seems it's there to retain tension on the spring clip and hold it in place.
2. I've read elsewhere that if I fly with the arm slack, the weight of the Typhoon will maintain the arm in position anyway. Is this correct?
Any opinions welcome.
Neill W