Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

h-elsner's latest activity

  • h-elsner
    h-elsner reacted to DoomMeister's post in the thread battery Typhoon H+ with Like Like.
    You can purchase an adapter cable for the H Plus (or H520) batteries for use on chargers that accommodate a wide range of lithium...
  • h-elsner
    h-elsner replied to the thread battery Typhoon H+.
    https://www.gifipower.com/For-YUNEEC-b52147.html They also have adapters to connect Yuneec batteries to other chargers. I use a Sky RC...
  • h-elsner
    h-elsner replied to the thread battery Typhoon H+.
    Here is an example with 3 different batteries (from H520) how to assess the condition of the battery. The 3rd battery caused a crash...
    • Examples_en.png
  • h-elsner
    h-elsner replied to the thread Yuneec typhoon q500 4k.
    There are two tiny boards on the nose. One is the compass and has nothing to do with gimbal. The other is the contact plate for the...
    • PWM_abgriff2.jpg
    • PWM-Signal2.png
    • Q500_innen04_a.jpg
  • h-elsner
    h-elsner replied to the thread battery Typhoon H+.
    1) There are simple LiPo checker on the market. Those are good to check if the battery is balanced and what is the voltage without load...
  • h-elsner
    h-elsner replied to the thread Yuneec typhoon q500 4k.
    Ohne Anfrage in deutschen Foren gibt es auch keine Hilfe in deutschen Foren. Check this...
  • h-elsner
    h-elsner reacted to DoomMeister's post in the thread Loose tiny cables on GCO3+ camera with Like Like.
    You will have to disassemble far enough to access the gimbal control board and use needle style probes on a DMM to continuity check the...
  • h-elsner
    h-elsner replied to the thread Typhoon H, please help anybody :).
    If something went wrong with channel mixing to get throttle down to zero by start button the other channel settings may affected too...
  • h-elsner
    h-elsner reacted to WTFDproject's post in the thread Typhoon H, please help anybody :) with Like Like.
    I just noticed an error in my understanding of what you said. Maybe we should go over this one item at a time: The beeping comes from...
  • h-elsner
    h-elsner replied to the thread Loose tiny cables on GCO3+ camera.
    This is the IMU (gyroscope) of the gimbal connected to a I²C port. Because all the wires have the same color it's hard to find out how...
    • MPU6050_Cam_a.jpg
    • CGO3Plus_Pinlayout3.jpg
  • h-elsner
    h-elsner replied to the thread How to control E90 via its UART by another app.
    If you want to use those cameras on other devices or standalone, you need to access to the serial connection (UART) of the camera...
  • h-elsner
    h-elsner replied to the thread Image problem with the CGO3+ camera.
    J4 (roll stick) is the reason for the sound. The drone warns if sticks are not centered to avoid surprises after take off. It looks...
  • h-elsner
    h-elsner replied to the thread Replacement for the Typhoon H GUI.
    This GUI is also working with H920 Plus (H920+). It reports always Sensor error because the Sonar is missing. I will improve H920...
  • h-elsner
    h-elsner reacted to larsesilen's post in the thread WARNING with Like Like.
    I did a new test flight actually two flights. In the first a Typhoon H480 with a CGO3+ camera was used. Originally there were 5-motor...
  • h-elsner
    h-elsner replied to the thread How to control E90 via its UART by another app.
    Binaries for windows are now available at the link above.
Show older items