Recent content by H2O Aviators

I changed mine out for xt-90 connectors

yup, same here. Waste of money, when I bought it, they told me they would have updates and different cameras available in the future.

Strange, when I had mine apart I didn't see any sensors on the door at all.

Ah, I get what you are saying. If the solder joints on the XT-90 solder board break, it is still held in place with the sandwich, this prevents stress on the solder joints. The XT-90 connector has a grove on it to prevent it from pulling through the carbon fiber, so that connector is actually...

Its extremely solid, I bought 4 of them, thinking the same thing. And I used the 2mm carbon fiber and when bolted together with the solder plates, it doesnt flex at all.

The lower carbon fiber board is screwed to the original 6 screw locations for the original batter connectors. I just cut the screws shorter and reused them. The upper solder board is attached to the carbon fiber board, with nut and bolt with a plastic spacer, one on each end and one in the...

Thanks! How are you guys charging these Zippy's, same as the factory ones?

Well, I decided to install some XT-90 connectors into my H920+ so I don't have to mess with adapters. I upgraded the power wire to the bistro board to 10awg wire as well. I built the mount out of carbon fiber and screwed it to the factory batter connector mounts. It worked out very well and...

@Dougcjohn the H920 platform is dead, Yuneec isn't working on it anymore. 920/920+ Spare Parts

What I don't like: 1. the lose of the zoom on a hardware pentameter 3. the lose of team mode 4. extreme battery consumption What I do like: 1. the follow me, etc 2. quick disconnect props

@thoneter what is he selling it for? If its a decent price I would sell you mine and I can FaceTime with you and you can see all of the gear live. I upgraded from the original H920 and I am not happy with the plus version, to the point, I don't fly it. If I could trade for an original H920, I...

You are correct. If I could do it over again I would avoid Yuneec altogether. I have a H920 plus and a typhoon. Customer support is horrible at best and tech support lies to their customers. The cameras are just ok and should be much better.

Did you order the CGO4 and the proaction?

I think we should all call Yuneec once a week to check status on the firmware update.

The proaction came with the balance cable, might want to double check your boxes.