Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Recent content by JMolter

  1. JMolter

    Way over-exposed pictures

    Okay I did this and everything (both ST16 and Aircraft settings) are the exact same as what you have in your screenshot, the only thing different was that my gimbal said v1.27 which I doubt is relevant. So maybe I'll just have to spend more time messing with ISO and Shutter Speed settings.
  2. JMolter

    Way over-exposed pictures

    How do I check the firmware of the CGO3? I'd say images started becoming significantly more over exposed in this past year (I mostly only use my H from late spring-early fall) Videos don't seem to be as bad, maybe a little over exposed but not to the extent that the pictures are. I think the...
  3. JMolter

    Way over-exposed pictures

    As of lately no. Lowering the ISO and raising the shutter speed is probably what I should try, correct?
  4. JMolter

    Way over-exposed pictures

    Whenever I take pictures on my H, they are super over-exposed. Even when I lower the EV on the ST16 before taking any pics, I still have to additionally lower the exposure as much as -2.0 in post processing to make the picture look normal. I have reset the camera a few times but that didn't...
  5. JMolter

    CGO3+ Issue

    So the new roll encoder I ordered just came in the mail today, so I plugged it in in place of the old encoder, turned my drone on, and got the same error sound that I was previously getting. Am I missing something with the setup or something? I tried calibrating the gimbal from the ST16 but...
  6. JMolter

    CGO3+ Issue

    Sorry for taking a few days to get back to you on this. Been gone all weekend. So what I just did was I simply switched the connection point of the roll encoder and the pitch encoder around (I put the connector for the roll encoder in "H" and put the pitch encoder connector in "G" from this...
  7. JMolter

    CGO3+ Issue

    I followed the instructions from the document and looked for any issues with the roll encoder wire. I don't see any. I took my multimeter and tested the continuity of the three wires from the soldered end to the connection point on the circular gimbal board and the multimeter beeped. So i don't...
  8. JMolter

    CGO3+ Issue

    Thanks for the reply. Yeah sorry my camera is a CGO3+
  9. JMolter

    CGO3+ Issue

    Hey everyone, it's been a while. I took my H out to fly today but the CGO3 gimbal would not stabilize when I turned the drone on. The camera would just dangle down facing the ground and wouldn't stay up when I tried to manually put it in the correct position. I restarted everything 3 times and...
  10. JMolter

    Question for the Experts on Here

    To all of the people on this forum that can read telemetry and generally know the answer to just about every question that's asked on here, first of all thank you. We all appreciate you so much. I'm genuinely curious though, how did you all become so knowledgeable about this hobby and Yuneec...
  11. JMolter

    Yuneec Pilots Locations Map

    Looks great. Thanks a bunch!
  12. JMolter

    Yuneec Pilots Locations Map

    Please add me: JMolter Typhoon H Pilot Cedarburg, WI 43.295321, -87.983654 Standard blue point This is awesome, thanks for doing this!
  13. JMolter

    ST16 froze mid-flight

    Not sure. It was frozen in the air for probably 3 minutes and never reconnected. I'm trying to figure out if it happened because of the cold, because my battery wasn't fully juiced up when I started flying, or because I was around trees and a lot of metal objects.
  14. JMolter

    ST16 froze mid-flight

    Correct it never said that. Just the same frozen image on the screen.
  15. JMolter

    ST16 froze mid-flight

    I was using the mushroom antenna