Recent content by MattaM

Thank you for the answer and advice. I get on 3.61 / 3.95 / 3.40 / 3.96 for a total voltage of 14.94. on the other I have 4.15 / 4.10 /4.09 / 3.75 total voltage 16.10. there are no extraordinary gaps. I am tempted to make a little flight with the fullest of both, see if she accepts the...

Hello everyone. I left 6 months without being able to take the bird, on return the batteries are impossible to recharge, a blue light flashes 3 times with a beep. They still have energy, if I turn on the drone it tells me 75 for one and 39% the other. They have few charge cycles. May be...

OK, thanks

Sorry for my poor english. what use of the micro usb port on the c23 ? I tried to connect it to a Mac and a Windows, Typhon H turned on or off, but no connection.

I found a solution but it is quite long and delicate: empty the dampers with a syringe equipped with a big needle, clean the inside with acetone, always with the syringe through the same hole. Dry by injecting air with the same tool, repeat the operations until perfect cleanliness. Then inject...

I found last night the build 750 on st16s. Hooray, the camera vibration seem solved (phew). I have not tried the new flight modes yet. Someone to an idea of the difference between manual mode and without GPS?

I run on Build 652_20180507, for all éléments.

Yes, I can believe what you say. What surprises me is that many users in Europe have access to some updates, and other users of the same product also located in Europe do not have access. Maybe some updates are only accessible with the realsens module installed? it seems weird because these...

Merci pour la réponse en parfait français, j’ai quelques difficultés avec l’anglais. Even if it must be laughable, I continue with Google, out of respect for the site. The mode without GPS would be useful here, on valley the gps is not top and the drone forbids me too often to fly. Headless mode...

thanks for the help. The drone, the st16s and the camera are in version 1.0.08, no other firmware is available here. I will see if the new Firmware for the camera can work with old firmware on st16 and H+. In case it works worse, I could go back to the old one for all. I saved on a memory...

Same problem on my th+. On seting menu in pad mode - accessibility - zoom. Deactivate this. Hiden menu comme back.

hello from France, excuse my bad English Google. Here I do not have version 1.0.10 available, the st16s tells me "no update required !". But with Firmware 1.0.08 my c23 makes this continuous noise in neutral position. which deteriorates the shots. This was not until update 1.0.08. is there a...