Recent content by Mc-Murph

Hi terrence, Don know the exakt Nummer cause the H520 still is ar Yuneec, but I regularly Check for updates, so it was the latent firmware ... the E Version. Greetings Marc

Hello DataFlight, from the first look on the pictures you are right.The real damage is visible on the undersite. Due to the power of impact directly from the cam (E90) the whole inner and outer frame is broken, the battery case is broken .... The landing gear mechanism is broken on both legs...

Oh, thanks for the hint ... Ok, this link should work Flight Review Greetings Marc

Hello everybody, on 13.06.2019 my Typhoon H520 fell like a stone from the sky. About the crash and the then until 23.07.2019 following "discussion" with Yuneec I would like to report here. I am currently documenting progress on a large construction site, including surveying. All necessary...

Hi Sarah, I do not know exactly at the moment, I am not in front of the drone. Try the advance mode, but I think you can normally define the behaviour in case of reaching the limit of the Geofence: I think you can choose between loitering, RTH (behaving as you told the drone exactly like shown...

Hi Sarah, your picture shows the behaviour of the drone in case of activating RTH or activating the RTH ( one of the above described possibilities in case of loosin Connection) in case of loosing connection. You can choose how the drone should react in case of loosing Connection. This behaviour...

Hi Sarah, not knowing what you exactly mean ??? Greetings Marc

Hi Sarah, are you talking about a Typhoon H+ or a Typhoon H520 ? Just can tell about the possibilities with the H520.There you can choose between landing immediately, hovering till the battery is empty and then landing, or loitering till he gets the signal back in a certain time, otherwise...

Hi James, You are talking about a CGO-ET to use with the Typhoon H, right ? Du to the fact, that the Typhoon H and the Typhoon H+ are total different platforms (Hardware & Software), you wont be able to use the CGO-ET with both systems. Greetings Marc

Hi Didier, I am not sure, but maybe this is a result of the image format (4:3, 16:9, etc. ) ? Maybe this option only effects the .jpg format ? I am not sure, just a hint ;-) Greetings Marc

Hi Jack, Would be a shame if it happens. I do not believe so. Why do you think, this will happens ? Greetings Marc

Hi JMBTBG, yep, i also tried a full reset ... nothing helped. I think there were some bits tumbled together, so my camera believes she is a toaster ;-) I called Yuneec Europe several times and after some helpful hints and a lot of patience I succeeded and the camera behaved as normal ...

Hi all, I need your help. After the last Update, I realized that the E90 does not react to the Gimbal controls. All other functions, taking video or taking photo, react as normal ... only the gimbal controls (tilt and pan) does not function ... although the first initialization of the cam ( the...

Hi Marnix, You are right, the e90 for the H520 and the c23 are nearly identical - there is only one small but crucial difference. The two Cameras use Different protocols to communicate with the drone. So you are not able to use the c23 with the H520, or the e90 with the H+. Greetings Marc

;-) ..