Recent content by MCDC

Hi, Mantis Q operates only in 5 GHz Wifi (FCC ID 2ACS5-YUNMQA Mantis Q by Yuneec Technology Co., Limited) and its original controller also (FCC ID 2ACS5-YUNMQRC Mantis Q Remote Controller by Yuneec Technology Co., Limited) from the FCC report: New Mantis G will operate in 2.4 and 5 GHz as...

Hi, The controller connects with its own wifi internal module, and uses the phone and app to display video, data and some controls (not flying controls). In this mode you don't need phone's wifi. Phone's wifi/data are only used to download firmware updates and send them to the controller by...

Hi, to use QGC you don't need the controller, but a 5 GHz Wifi capable device instead (iOS, android, linux or windows one, with QGC installed) Have a look to Mantis Q questions I use a windows laptop with its internal wifi adapter and antenna. You can obtain better range for your mission if...

Excuse the delay, I have been out last weeks. The controller connects with its own wifi internal module, and uses the phone and app to display video, data and some controls (not flying controls). In this mode you don't need phone's wifi. Phone's wifi/data are only used to download firmware...

This is a very short distance, indeed. Be sure your phone wifi does not connect to the Mantis Q, I suggest to switch phone wifi off. When tablet/phone connects via Wifi to Mantis Q, the App uses Phone Mode, one could see wirtual joysticks on the screen In this mode, maximun range is around...

You can`t update Mantis Q firmware using QGC, and you should not try, as QGC states "QGroundControl desktop versions can install PX4 Pro or ArduPilot firmware onto Pixhawk-family flight-controller boards" Mantis Q is PX4 based, but it has not a Pixhawk compatible board. I had no problems using...

It appears you're trying to connect using QGroundControl from a phone or tablet with Android or IOS. You only need a 5 GH WiFi capable device, and connect to your Mantis Q AP using its SSID and password. Don't connect at all your controller. Start QGroundControl and it will discover and...

If your problem is the APP crashing, you can revert to previous version, at least if you're using an Android phone. -Unistall the Yuneec Pilot APP -Copy an older version to your phone/SD card -From file explorer tap on it and install I installed previous 1.1.3 and 1.1.7 versions for Android...

Hi @FINNY, did you solve your question? You only need 5 GHz Wifi connectivity, get an USB Wifi if not built-in. As @WTFDproject suggested, you can use any stream player RSTP capable. For your PC you may install VideoLAN VLC Player, picomixer PMPlayer, or any other, an connect to...

Yes, it is a bit tricky, and it will void your warranty. At first, i suggest you to double check all connections, I found that if there is any sensor not set up correctly, system hangs in a loop and never connects through Wifi. After I attached a FTDI cable to the debug port (system console) I...

< Eliminated after the friendly request of the affected party. I apologize for the inconvenience >

Hi moms, there is no firmware in the internal micro sd. I had a look to the internals of this little wonder, I disassembled my Mantis Q after giving a look to FCC ID 2ACS5-YUNMQA Mantis Q by Yuneec Technology Co., Limited in 2ACS5-YUNMQA_Internal Photo This is the contents of the internal...

Hi, I just found prop guards in shop.yuneec.com/eu see Accessories but I can't find them in us.yuneec.com