Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Recent content by Mokuluanui

  1. M

    Taking a drone as carry on.

    I live and fly in Hawaii and have traveled with my drone to Palm Springs and Chicago. The main thing for me was to carry my drone and all the batteries in my carry on, this based on the way checked baggage is treated. In reality, only the batteries need to be on carry on, if you have a great...
  2. M

    BREEZE BATTERY PROBLEMS

    That's a good question! You might check the usual outlets.
  3. M

    BREEZE BATTERY PROBLEMS

    Based on your post, I would stick to OEM batteries, that's what I have and they have been reliable, other than getting out of balance on occasion.
  4. M

    BREEZE BATTERY PROBLEMS

    I have seen this as well, so I don't really trust what the app says is the charge. Try charging the battery as usual, but then checking the charge with a Multimeter, you may find that the battery is not in balance or more than likely, you confused a battery that was spent and placed it in the...
  5. M

    Will I ever get my Breeze replacement?

    I wasn't very patient and bought another Breeze last year because I wanted to use it on a Neighbor Island paddle. After a few months, the repaired Breeze came back and now I have 2 Breezes. It doesn't hurt to have 2, since it's good to have a back up and it's not heavy on the budget like other...
  6. M

    How to transfer photos/videos

    Newer PC's don't have SD card readers, they have only usb plugs, so you need to get a SD card reader to USB adapter. Make sure it has a Micro SD slot in the adapter.
  7. M

    Yuneec Breeze 4k

    The Breeze is a great little quad. It's small enough to pack into a small pack and to set up, ready to fly takes minutes. If you are traveling that's where the Breeze shines as it passes through TSA without any concern. I kayak all over Hawaii and the Breeze fits in the hull of my kayak and can...
  8. M

    Memorial Day in Waikiki Hawaii using my Yuneec Breeze

    Made a video using the Breeze on the first holiday that beaches were open in Hawaii:
  9. M

    BREEZE BATTERY PROBLEMS

    I would unplug the battery, then plug it back in, wait. Next, if that doesn't solve the problem, I would try a different Breeze charger. If that doesn't work, I would check the voltage using a Multimeter for each cell. If it is unbalanced, you might want to use an after market charger to...
  10. M

    BREEZE BATTERY PROBLEMS

    I have found the battery meter on the app to be somewhat unreliable, you may have mistakenly used a spent battery that looks like it is 100% when you first launch, but in reality it is already spent. I have done this and it becomes more likely if you bring multiple batteries. Once I was flying...
  11. M

    repair cost?

    Yuneec has always been excellent in standing by their products, it may take a long while to repair your drone, but they usually fix it at a very reasonable fee. Ask for an estimate before proceeding.
  12. M

    Q500 G GOPRO MK58 no comand respond

    Pablo, You might check the icon if you are in the video +photo mode because there are certain video modes that will work with this feature and some not.
  13. M

    Q500 G GOPRO MK58 no comand respond

    Everywhere I have read or seen about the Typhoon G does not recommend using the Go Pro Remote with the drone. So like Pegasus, I use the video and interval photo feature on the GoPro, and truth be told, it's pretty good. If you really are afraid that you're going to miss a shot you can...
  14. M

    For Those Thinking Drones are Expensive

    What people don't remember is that Kodak invented the digital camera. They attempted to manufacture cameras in that market, but the consumers wanted the Japanese brands. I have several Kodak digital cameras, but I bet most people didn't realize they sold them having a preconceived bias against...
  15. M

    Cannot find the Breeze on the Comfast Scan

    DM Thanks for your reply, I actually re-read the thread earlier and have been following the instructions, one thing I may have not done is to press the reset button for a full 10 section. I'll give it another try soon.