Recent content by Only1nexus

Ok, here we go. I put the props on, then i set the Q500 on a lvl surface away from metal, I turn my st10 on wait for it to beep at me, I then reach under the Q500 and turn it on making sure I do not lift it. WIFI and camera connect I use the pan up and down and it works great. I lift off and do...

here is yet another video with your music.

the constant humming noise is the small fan in the controller.

No I did not notice a vibration when testing and yes the blades were off, but the back left motor seemed to have a different sound. Not sure how to explain the sound, I will try and get a video and sound clip put up when I can.

Ok, After about a month of not being able to fly( weather, high winds) I was able to go out today. 6mph winds 8 mph gust. As i was taking off and letting it hover for a few seconds I noticed a slight hum in one of the motors. I landed it shut it down and reinspected every thing took the blades...

Yes listen to him. I did not have my controller in front of me, I was out of town all day. Sorry for the wrong directions. Hope it works for you.

Go to flight settings center touch button. In there there is a menu to check the controller button calibration. Looks at the stick movements and button presses and the two sliders for speed and tilt. Make sure they are all working. I do a reset every couple weeks just to keep it all centered.

Look at the menu and make sure the tilt control on the remote is working. May need to reset the buttons so they are default

Make sure you have the right app. I believe there are two apps from yuneec. Just make sure it's the one for your camera

No only one is retired and it was the one i flew over. There is another one that is a hotel and during the summer months it goes up and down the Missouri river.

I have not had this issue. But in my experience in after market items unless from a reputable company it may be an inferior product and just not hold a charge or been put together correctly. As for the fly away and zero control i am unsure, all i can think is zero battery power may cause it to...

I had the same problem a few weeks ago. Hit the button heard the capture sound but then it said picture not taken. I think it had something to do with how far I was. When i brought it closer it worked great.

If it has power to it and you know the direction it went turn the controller on and it will have a green arrow if the bird and controller both have GPS lock. keep the arrow pointed at you and start walking. thats my best advice.

I have another Video with your music

I was just about to post on this. It looks Like an ST16 controller. I did see that the drone had intel all over it, maybe due to the lights and the mechanism to drop the ball?