Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Recent content by Russ

  1. R

    Motor A,B replacements

    Thanks Flashcrash. Yeah, the amber light is on and the ST10+ does tell me the RC is connecting, but no beeps or flashing lights at all. If it wasn't for the amber light, I would have thought the batter might be dead, but both batteries I have are showing 12v+ on a multi-meter. $399 seem pretty...
  2. R

    Motor A,B replacements

    Thanks for all your feedback and suggestions flashcrash. I was going to try to re-do the ESC check/assignment last night with a freshly charged battery and now I have more problems. My Typhoon will not even power up anymore. Turn it on and no flashing lights anywhere. Except a small amber...
  3. R

    Motor A,B replacements

    Thanks for the quick response. I didn't realize the GUI allowed you to test each motor/ESC. I've had two crashes. The first one I had to replace the ESCs, props and batteries. The second was more catastrophic - landing gear, body, camera mount. When I got it all back together, I had the...
  4. R

    Motor A,B replacements

    I've been through similar problems. Had to replace the main controller board as well. Everything checked out on the GUI and did the calibrations. It seemed like I was good to go... until I hit the Start button. The props started turning. It was extremely loud. Failed to move. Within...
  5. R

    Repair Shop recommendation?

    Good news - I did some research and found out all four ESC's were burned out. You could physically see it on the chips even though the GUI reported they were okay. Still had some stability problems, but I RTFM and discovered I was incorrectly calibrating the compass. Seems to be pretty good...
  6. R

    Repair Shop recommendation?

    Got my 4K a week ago and had an awesome first day flying it. The trouble is that it was so easy to fly that I thought I was a much better pilot than I was. The next day I flew, I ended up running into a bridge support and splashing down in the water. After blowing any remaining water, I left...