Recent content by simonmac

Thanks guys ,

I don't know what it is people are using hooks for ? I just cut the wires next to the connector, once the connector was disconnected . i didn't touch any other part of it at all and then the slip ring and the bare wire end simply pulled out .. Nothing was disturbed . why would people try to...

That would make alot of sense That would make alot of Sense Steve had mentioned the same tonight before messaging you. The main reason for powering the camera externally was due to my worry that it would infact not work at all. @Steve Carr sent a picture on facebook of the fuse , am i right...

Yes Sorry my error the green is 3.2 volts

Let me double check i may have the voltage reading incredibly wrong, Sorry i dont use voltmeters often if at all and all these number have thrown me Give me a minute and i will check . I have managed to add a video to Youtube .. how easy was that , i had expected it to be so much more difficult...

Video just showing it powered up the white and green wires are not connected to the drone here.

Thanks WTFDproject , I have connected the power to the camera using a 12v rail and grd from my pc power supply . I have ordered the slip ring its not came yet , What i did was remove the white wiring connector from the gimbal board , cut the wires about 1" from the connector and pulled the...

Hi everyone , new to the forums A really nice helpful guy on facebook recommended posting here . I have recently bought a typhoon h with cg03+ camera and st16 controller , it turns out it had been crashed long story short the wires were ripped from the camera and the K fuse has blown on the...