Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up


  1. JulesTEO

    Finally got a PixAero 3.77 replacement lens

    Not a new topic by far, but still I wanted to share with you that I finally decided to upgrade to the PixAero 3.77mm lens. I was a bit reluctant because I had to purchase directly from the manufacturer in Russia (and Mexican postal service leaves a lot to be desired). However, everything went...
  2. A

    3.97mm f/2.8 Typhoon H Lens Upgrade

    So I recently took on the lens upgrade but my 3.97mm f/2.8 Lens did not come with the threaded mount and this is an issue in my case because our Typhoon H has a smooth barrel. After some TENSE work into removing the lens i found out it is a fixed glued lens. Do any of you have some "Hacks" i am...
  3. C

    PixAero Lens Upgrade

    Has anyone done the lens upgrade on the newer style of CGO3+ lens. Mine has the fixed lens that is glued to the sensor board. I understand that i will need to remove this and use the screw adapter that the Pixaero comes with, but unsure as to how to remove the stock lens. Any help or photos of...
  4. Jared

    CGO3+ service question

    After looking at the pictures posted of before/after for focusing the CGO3+, I've concluded that mine does indeed need to be focused. My question is: should I bother with sending it into Yuneec and let them do this since it's still under warranty, or just do it myself and (possibly) void the...