voltage

Hello, I propose you to read an online article dealing with a project of heater LiPo batteries bag for drones or electronic equipments from this page of my blog: Sac chauffe-batteries pour drones en hiver There are many pictures and you could use Google tools to translate...

I've been reading a great deal about proper battery storage for optimal battery life. There seems to be a lot of information for many Yuneec products, but not the Breeze. As this is the first winter since I purchased my Breeze and I live in Northeastern Wisconsin, I don't think I'll have many...

So my original yuneec batteries were destroyed due to my poor lipo care habits. One of my batteries leaked fluid, and the other one stopped charging. The battery that stopped charging would continuously showed 11.1 volts on the transmitters telemetry screen and after leaving it to charge...

Hello All I am new to the LiPo battery and the Typhoon H, so your wisdom would be gratfully recieved. After looking a wide range of threads, I generally aim to land my UAS at 14.7v (displayed on the ST16). With the exception of a low battery test. At present I am getting about 15mins flight...

Hey gang, I'm out flying again for the first time in a while. Stock battery, full charge. I fell like it drained awfully quick... I was down to 14.7 in a matter of like 2 minutes. Probably 50-80ft up there, no crazy wind. I did tinker around like 10 minutes on the pad with some camera settings...

Are there any tips out there on how to get the Typhoon H batteries to their storage voltage using the supplied charger? Say, land at first warning and then charge for 15 minutes.. Or charge for x minutes for each 10th if a volt below the storage voltage when you land?

You may recall I bricked my Q500 4k when the firmware update stopped in the middle. I sent it into Yuneec, California, and about a month later, I received it back. When I start up the Q500, I get a blinking blue light. Ive tried several charged batteries, but get the same light. The ST10 also...

I spent several hours over the weekend reading threads and watching videos on Lipo batteries and took notes etc.. This is the guide I came up with and I think it is pretty accurate. I am not an expert in any way but this information is from various sources and seems to be the best overall...

Is anyone can tell me the voltage level when there are 2 batteries in full charge and when there are three?