Cable curve camera function not working

[Simple Simon]

Hi everyone

Tried a couple of times to out the typhoon in a CCC mode, I have plotted the course, go to the start, set the camera to gimbal mode but when I start the flight I get no control of the camera to get the shot I want.

Any ideas....

 

[rdonson]

Try this tutorial

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Simple Simon]

Try this tutorial

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Hi thanks

Have done all the steps dhown, it is when I start the run I have no gimbal control for the camera. It will record but straight flight only

 

[rdonson]

How are you trying to control the gimbal?

The camera can be controlled via the right joystick during the mission when the Pan Mode switch is set to Global Mode.

I’m no expert on CCC so I’m hoping @Ty Pilot chimes in here.

 

[Ty Pilot]

@Simple Simon if the Typhoon is running the CCC mission as planned but you cannot control the camera - as @rdonson says, make sure the pan control switch is set to the global position.

 

[marcosacco]

Hello, but the function CCC on Yunecc Typhoon H Plus works as the H?
I've a problem with Typhoon H Plus (fw Autopilot 1.5.0 - fw Camera 1.1.02_20181122 - fw System 1.1.02_20181122 - fw App 1.1.02_20181122)
The camera during CCC Curve Cable Cam it's uncontrollable with Tilt and Pan. Anyone can help me?