E90x

[Stephen1988]

Is it normal for an e90x to make a rattle noise at the connector point, kind of sounds like a ball bearing is rolling around. Also another observation I made is if u hold the connector u can revolve the camera about 1.5 full revolutions before it locks , the e90 will revolve forever, does this mean u can’t keep turning this camera in flight through multiple revolutions or does the place is connects to the drone also turn, I don’t have h520e myself or have never actually seen one in person. Any reply’s would be much appreciated

 

[DoomMeister]

The X series cameras do not have continuous yaw like the cameras prior to them.

To my knowledge they have a mechanical stop. Not sure what actual yaw range they have.

Pretty sure @Enrico Jorysch could give fuller information.

 

[Stephen1988]

The X series cameras do not have continuous yaw like the cameras prior to them.

To my knowledge they have a mechanical stop. Not sure what actual yaw range they have.

Pretty sure @Enrico Jorysch could give fuller information.

I’m curious to if u keep turning the camera will it make the hex turn when it has reached its limit

 

[Steve Carr]

I’m curious to if u keep turning the camera will it make the hex turn when it has reached its limit

No. The camera stops when it hits the yaw limit. The flight controls are separate from the camera controls.