Figured I would post it in here regarding setting up team mode. Hope this helps.
Steps to link 2 ST16s controllers in Team Mode.
1. Startup both controllers and make sure your master controller is connected to the drone and camera. Do not try to connect the slave controller directly to the camera, you will not be able to initiate Team Mode on either controller if you do so.
2. Select the task icon and click Team Mode on both controllers.
3. On the Master Controller, there is an Equipment ID listed in the Team Mode window, this is the name of the Hotspot of the Master Controller. On the slave controller, you will see the Equipment ID of the Master Controllers SSID Hotspot it creates for the controller in the list window. Tap the hotspot name.
4. If this is your first time using team mode, a dialog box will be displayed on the Master controller prompting for permission of the slave controller to connect to the master. Click OK. You should immediately see video on the slave controller of the drone. You can now control the drone's video recording, settings and camera position with the standard camera controls.
Steps to link 2 ST16s controllers in Team Mode.
1. Startup both controllers and make sure your master controller is connected to the drone and camera. Do not try to connect the slave controller directly to the camera, you will not be able to initiate Team Mode on either controller if you do so.
2. Select the task icon and click Team Mode on both controllers.
3. On the Master Controller, there is an Equipment ID listed in the Team Mode window, this is the name of the Hotspot of the Master Controller. On the slave controller, you will see the Equipment ID of the Master Controllers SSID Hotspot it creates for the controller in the list window. Tap the hotspot name.
4. If this is your first time using team mode, a dialog box will be displayed on the Master controller prompting for permission of the slave controller to connect to the master. Click OK. You should immediately see video on the slave controller of the drone. You can now control the drone's video recording, settings and camera position with the standard camera controls.
Last edited: