Greetings Fellow Pilots! Well here I am again with yet another question. I have noticed lately that my status LED does not maintain a continuous purple color. After I have gone through the process of binding and calibration I get the purple LED. However, it glows purple for about 4-5 seconds the turns green for about one second then purple again for about 4-5. The cycle continues throughout the flight, before and after landing. I checked the status chart for this pattern and did not find it. FYI I occasionally get a "Lost GPS" warning that comes and goes. Also, i will get a message in red type saying that it is unable to connect to the camera. That message appears briefly and occasionally. Normal camera operations return. Yesterday, I was launching from a paved parking lot. The drone lift off with a tilt to one side and made a looping clockwise circle on it's own. I was about to abort the flight with the kill switch when it settled. I did my standard test maneuvers and decided to continue the flight. The rest of the flight was normal. Was this incident related to the status light cycle? I'm not sure if my status light was ever a continuous purple since I purchased the craft over a year ago, or if it is something that started recently.
My question: Should the status light remain purple continuously?
My question: Should the status light remain purple continuously?