Referring to this video:
The video addresses the problem of jerky movement of the H with the initial control command. It uses the Broken Line rate curve adjustments to correct the problem by adjusting how fast the H initially responds to control inputs and then at a faster rate as the stick is moved further to allow for the full control range. I noticed that a curve similar to the one recommended in the link could be achieved by adjusting the Expo to about 17.6%. I haven't had the opportunity to evaluate either without actually flying. The Expo curve seems somewhat smoother. Is there any reason to use one over the other and if so what is the advantage
By the way, I noticed that the Expo adjustment didn't behave properly after first fooling with the Broken Line adjustments. Not saving, just adjusting. The null point would move when adjusting the Expo values. Restarting the Channel settings corrected the problem.
By the way, I noticed that the Expo adjustment didn't behave properly after first fooling with the Broken Line adjustments. Not saving, just adjusting. The null point would move when adjusting the Expo values. Restarting the Channel settings corrected the problem.