- Joined
- Nov 21, 2017
- Messages
- 24
- Reaction score
- 4
- Age
- 62
Hello all! Noob here. Prior to the first flight I updated the ST16, installed NFZ firmware, then updated the H with firmware package 3.04A. All went well and the bird flew fine. Drone and driver safely conducted 2 flights.
The problem is the video. The stills came out fine, the video is horrible. Stuttering, green screens and artifacts galore.
I set the resolution to 3840x2160F24 and of the 6 videos shot, only 1 was on the sd card in the camera. The other 5 were in the ST16 internal memory. The 5 in the ST16 had a resolution of 1280x720 and had the same stuttering and artifact problem as the vid on the sd card from the camera.
I sent a couple of days watching videos about the bird and did all if the calibrations, compass, camera and level platform.
The sd card is a 32gb class 10 and has a symbol of an I in the center of a U, and has a write speed of 20 mb/s. Is this too slow for the resolution I was recording?
The video problems persist when they are viewed on a computer or the controller.
Is there any documentation for the CGO3+ Pro that I can RTFM? The official manual (Ver 1.2) is rather thin on camera docs.
Thanks,
The problem is the video. The stills came out fine, the video is horrible. Stuttering, green screens and artifacts galore.
I set the resolution to 3840x2160F24 and of the 6 videos shot, only 1 was on the sd card in the camera. The other 5 were in the ST16 internal memory. The 5 in the ST16 had a resolution of 1280x720 and had the same stuttering and artifact problem as the vid on the sd card from the camera.
I sent a couple of days watching videos about the bird and did all if the calibrations, compass, camera and level platform.
The sd card is a 32gb class 10 and has a symbol of an I in the center of a U, and has a write speed of 20 mb/s. Is this too slow for the resolution I was recording?
The video problems persist when they are viewed on a computer or the controller.
Is there any documentation for the CGO3+ Pro that I can RTFM? The official manual (Ver 1.2) is rather thin on camera docs.
Thanks,
Last edited: