New Yuneec Typhoon H lights - by DLA WORKS

[NorWiscPilot]

What about this version?

Hang on... getting the right link.

Ok, here it is: tri-color in one unit. 2 white, 1 red, one green.

https://www.amazon.com/Firehouse-Technology-Tri-Color-Quadcopter-Contained/dp/B073Q4QYSN

To paraphrase one answer in the listing: “...the unit [aka UAS] is too small for real navigation awareness. However, the red/green will at least signify ‘aircraft’ “

That is, unless buzzing the tower a few feet off a waters’ surface!

 

[Eagle's Eye Video]

Consider these as well... same design, but with 2 LEDs per unit

https://www.amazon.com/Firehouse-Technology-Intensity-Approved-Flights/dp/B078THCX39/

Aerial-Pixel - Vinyl Graphics, Vinyl Decals, Apparel, 3D Printing

 

[rdonson]

@NorWiscPilot @Eagle's Eye Video

Where to you have these mounted on your H?

 

[Eagle's Eye Video]

They slip right onto the landing strut... I slide mine to just under where the antenna tubes extend to. Equally visible whether retracted or not.

 

[rdonson]

I’ve got mine on the legs too, about half way up.

 

[Dustoff]

I’ve got mine on the legs too, about half way up.

are the mounts a 3d printed part . i like the dual lights

 

[rdonson]

The ones I bought were definitely 3D (additive) printed

 

[NorWiscPilot]

I don’t have them yet. Getting the fever now that I’ve been reading this thread.

Dang!

 

[Dustoff]

The ones I bought were definitely 3D (additive) printed

guess i print my own mounts then

 

[rdonson]

I'm guessing that with so many look alike parts for this that maybe the design is available online for those with a 3D printer