Typhoon h dont start

[Miguel Angelo]

Hi all.

My H won't start today.
I have 19 sat on the H, 10 on the st16
I'm in angle mode and the light on the back of the H is purple.
In the St 16 I have a ready information
Any urgent wise advise?

 

[Thomas111]

Are you near any airfields try turning the GPS off and see if it starts if it does start then it's the area you are in must have NFZ

 

[Miguel Angelo]

No airfield, I saw the no fly zones. It's all OK. Try also turn GPS off and still don't start

 

[Thomas111]

O right ok well think it's a call to yuneec then buddy as that was my only ideas

 

[Miguel Angelo]

Thanks Thomas

 

[Thomas111]

Another thought check to make sure the return to home switch is not on if it is turn it off

 

[Miguel Angelo]

Like in the smart/angle/home stick?
It's in angle mode thomas

 

[Miguel Angelo]

The Hexa símbolo on the top of "ready" should be green?
Also my "ready" is in blue...
Don't remember how is suppose to be

 

[Thomas111]

Ok your in angle mode already ok the triangle should be green that's ur st16

 

[Miguel Angelo]

No green.
I also try the auto take off(without the blades) and it start.
But I can t manage to stop it. So I pull the batterie.
Yesterday I was changing some settingsort on the expo. Could it be I change something to the start stop bottom and don't realise? How can I get it to default?

 

[Thomas111]

What did u change and what settings did u go in to

 

[Miguel Angelo]

J3 and J4
Ele and ail
Only. But could I have changed something else.
Is there a way to reset all or we have to reinstall the firmware?

 

[Thomas111]

Ok it sounds as if I have changed the start/stop button which sounds as if you need to go back in to they settings and check that B1 is 100%

 

[Thomas111]

Sorry B1 is your arm button B3 is ur camera

 

[Miguel Angelo]

I will reinstall the firmware.

 

[Thomas111]

Ok

 

[Miguel Angelo]

Thanks again

 

[Thomas111]

No problem let me know if you fix it

 

[Steve Carr]

You will have to go into pad mode and reset the ST16 to the factory settings. Then create a new model, select a camera and rebind to the H and camera.

 

[Miguel Angelo]

Hi Thomas, did a reinstall firmware and it is functional now.
Thank you and Steve for the input