Recent content by artlewis

Thanks for the help. I'll try both suggestions.

Does anyone know of a faster system to charge the ST-16 battery? It seems to take forever with the stock Yuneec charger.

You will still need to obtain a couple of the locking pins and washers. They almost always break when there is stress on the camera assembly.. The easiest way is to order the complete set of rubber mounts and pins. Carolina Dronz, Terrestrial Imaging and others all carry the parts. However...

Did you find any rubber mounts in the bottom of the case? If not then the seller new it was damaged before shipment. If you found the mounts it is possible it was jarred during shipment. If all the wires are connected the repair is simple. You can order new mounts and locking pins from a...

Great idea. Saginaw, Michigan is now represented.

If you are having trouble with the ST-16 recognizing the H, try tipping the drone forward twice. Then, try again. i had that problem with the last update. Two tips forward and it cleared.

Have you installed the latest updates from Yuneec. I had OBS Failed and OBS Not Available until I updated. Now, all is well.

I'm having trouble getting the CGO3+ camera on my Typhoon H Pro to take still pictures. When I push the camera button nothing happens. I have to push it several times before the camera will take the picture. the recording button seems to work just fine. Any ideas?

Careful of the 64 card in an ST-16. It won't read a card over 32. That from a Yuneec service adviser.

Make sure your SD card is no bigger than 32GB. The ST-16 will not read bigger SD cards. I had tried a 64GB card only to be told by Yuneec that 32 was the limit. I ended up us using the 16GB card that came with the Typhoon H Pro. Hope this helps.

Can we assume you tilted the unit forward twice and now all is well? I had forgotten to do that while updating, so don't feel alone.

After the fall, 2016 update my Real Sense ceased to function. OBS Not Available or Failed was my constant message. Now that I have completed the newest firmware updates all is well again. Real Sense and everything else is functioning as designed. Moral of the story...Don't be afraid to...

jcowgar, Many thanks. Worked like a charm. Happy flying. Art

Having updated my ST-16 and Drone to the latest firmware I can bind the radio to the camera, but it will not find the drone. I have camera control but no flight controls. Any ideas?

I have a Typhoon H with Real Sense. I updated by ST-16 to the new '30' firmware. Now my ST-16 will not communicate with the drone. I also get a request for a password to be able to connect to the camera. Any ideas?