Recent content by Avgjoe

I was under the impression that Real sense was problematic to remove. How do you remove it?

Thanks for continuing to look for CCC editing workarounds. :)

Will the linked UAV Toolbox work with the H Plus?

Hope the H+ has not been abandoned by Yuneec but seems it has bearing in mind past history and the release of the H3. It is amazing, all that we as a group have had to work through not to mention problems that are still being resolved or needing to be resolved primarily by this group here using...

Everyone's input has been excellent.:) Look forward to checking thread later as I am still at work.:)

Wish I had seen the 2 cent fix. Only difference between the 2 cent fix and the one I posted is the use of open cell foam allowing adjustment of dampening effect.

Excellent: Tis the yaw motor. :) Wish I had seen the 2 cent solution prior to my experimentation. The only difference is the open cell foam I used allowing adjustment relating to damping effect. :)

This fix that I have posted relates to oscillation about the vertical axis of the gimbal, and is diffinately related to the horizontal motor which rotates the gimbal horizontally. In my case, the oscillation was certainly audible and if I continued to rotate the camera upward; the...

I should have noted that camera balance had no affect on described issue either before or after KAV. Also, camera balance (within reasonable parameters) is a non issue after described fix.

Yes, I welcome any responses regarding fix. My field of study is mathematics/physics. The dampening effect of oscillation of gimble about it's vertical axis (gimble struggling to center itself as per instruction being received from the transmitter) is what is achieved by this fix. As mentioned...

Hope this fix is a help for folks. Will be interesting to see if this is the case. Time will tell. Thanks for replies.

Camera was on the TH+ stored in it's backpack/case with desicant (for water absorbtion) in my office. My TH+ was returned after being repaired by KAV and had the same issue even though the camera and gimble had been replaced. So I made observations and experimented with the result being this...

My TH+ was returned after being repaired by KAV and had the same issue even though the camera and gimble had been replaced. So I made observations and experimented with the result being this fix. It has worked flawlessly sense and if I remove the fix, the gimble issues return. The issue is with...

My TH+ worked perfectly using build 784 which is what I installed as per manual upon buying TH+. 784 was the latest build at the time. After putting the TH+ away for a couple months due to working so much and not having time; I then got out the TH+ and the gimble had developed the so called buzz...

These are pics of the fix. I used scotch tape, a quarter, and open cell foam trimmed to diameter of quarter. The tape should be applied (applying some compression of foam) so as to allow movement of the quarter about the vertical axis of the gimbal. The idea here is to dampen the oscillation of...