Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Recent content by robnmi

  1. robnmi

    Mantis G manual update process

    Good idea, i will try that..
  2. robnmi

    Mantis G manual update process

    Hi pilots! I have a Mantis G and i would like to put a beta firmware to it for testing the range. I have 2 update files. I put one (update.zip) on a microSD card inserted to the drone turned on and the fw flashing completed well. Then i tried to flash the controller with an USB stick inserted...
  3. robnmi

    GPS acquisition - Smart mode

    I think a found the explanation of the crash. Why did the drone moving backwards and not reacting to any stick input? I put in the GPS module the arrow facing forward! But it means the back of the drone, it is turned by 180 in the firmware.... It is SURE! :) It was my fault! I watched my...
  4. robnmi

    GPS acquisition - Smart mode

    Well, i thought the black shielding tape will help, but not... will remove the steel screw, and use only double sided tape. Thank you for the advice!
  5. robnmi

    GPS acquisition - Smart mode

    Thank you for the idea Steve! The mount for the GPS module is a little plastic priece, but the stand itself is an aluminium rod with metal screws at the ends. So i will try to remove theese and try again with proper shielding or raising much higher the GPS. I will also get the battery back to...
  6. robnmi

    8050 mh batteries.

    It is recommended to use original Yuneec batteries. But when it is out of stock, you have no other chance... I bought mine here: copter.eu - The YUNEEC Experts
  7. robnmi

    GPS acquisition - Smart mode

    Hello TYH owners! I possible have a similar GPS issue you are chatting here in this thread, but the drone is a bit different. See the pictures attached! :) It is a Yuneec Typhoon H on an F550 frame. I have built this only for fun, becase i had several spare parts and i was curious if this...
  8. robnmi

    8050 mh batteries.

    Yes, but the capacity is a litte exaggeration :) You will get 4-5 min plus flightime..
  9. robnmi

    MANTIS Q camera 3rd party camera servo

    I have dont exactly this! :) I ordered some micro servos from HK EU :) I will report after checking them....
  10. robnmi

    MANTIS Q camera 3rd party camera servo

    Hi Pilots! I have a little bit damaged Mantis Q. It is flying fine but the plastic gears in the servo were stripped. Has anyone tryed to fit a 3rd party servo for replacement? There is no yuneec part available for the servo only. We have buy the whole camera module. :( But it is a 2 dollar...
  11. robnmi

    How To: Retrieve Mantis Q Telemetry (Sensor) Files

    You download with this: QGC - QGroundControl - Drone Control And analyze here: Flight Review
  12. robnmi

    tracking if lost mantis q

    I did not tried to analize the new ones (sensor*). I dont know where they can be on my phone :) We have to find them! :)
  13. robnmi

    tracking if lost mantis q

    I could convert the "old" yuneec_* telemetry files with q500log2kml without any problem. But did not find any sensor_ files from the past and from present too. :(
  14. robnmi

    tracking if lost mantis q

    I read this thread and i thought i will give a try on my anroid phone to learn some about mantisQ telemetry retrivement. I have quickly found the "old" yuneec_ telemetry files /sdcard/YuneecPilot/FlightLog (There are 3 more directories Crash, Media, Upgrade - which contains the last update...
  15. robnmi

    tracking if lost mantis q

    Hi Mantis users! As a MantisQ owner i also tried to get the sensor files from the phone i used. I was unable to get them. I only found yuneec_ telemetry files from the past before the last update! Theese were totally processable with q500log2kml and put them into GoogleEarth. Tell me if i am...