Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

WTFDproject's latest activity

  • WTFDproject
    WTFDproject reacted to h-elsner's post in the thread GPS connection on mainboard with Like Like.
    GPS is connected to the middle one.
  • WTFDproject
    WTFDproject reacted to DoomMeister's post in the thread Old Drone, New Computer with Like Like.
    Adding to info from @h-elsner: SD card under battery in controller must be 32GB or less and formatted FAT32. It records FlightLog data...
  • WTFDproject
    WTFDproject reacted to h-elsner's post in the thread Need some help with Like Like.
    The HW monitor shows the reaction for the controls before the channel settings take place. The (hidden) output monitor shows reaction...
  • WTFDproject
    WTFDproject reacted to h-elsner's post in the thread CGO2 app for tablet? with Like Like.
    The CGO2/3 cameras have a build-in webserver that offers HTML-, DHCP-, RTSP- and maybe other services that are needed to setup a WiFi...
  • WTFDproject
    WTFDproject replied to the thread Replacing H580 main board.
    I don't think so, but there could be models I don't know about. I do know of at least one larger prototype that made it out to a few...
  • WTFDproject
    WTFDproject replied to the thread Replacing H580 main board.
    The image provided by @slw74 is an H520 board. The image provided by @cabinfourus appears to be something else. The H3 and H520E boards...
    • Board Possibilities2.png
  • WTFDproject
    WTFDproject replied to the thread battery Typhoon H+.
    Converted an SC4000-4H using the instructions. Works fine as OEM charger and also as an adapter for an aftermarket charger. Be sure to...
  • WTFDproject
    WTFDproject reacted to DoomMeister's post in the thread battery Typhoon H+ with Like Like.
    I completed the directions for modifying the SC4000-4H charger to allow it to be used as a battery adapter for 3rd party balance/storage...
  • WTFDproject
    WTFDproject replied to the thread Replacing H580 main board.
    It is not clear what you need. You posted in the H-plus forum, and asked about an H580 board, with an image that looks maybe like an...
    • MainBoard Connectors.jpg
  • WTFDproject
    WTFDproject replied to the thread Need some help.
    Your description has features that lead towards a couple of very different conditions. Please review each of these initial thoughts and...
  • WTFDproject
    WTFDproject reacted to MountainDroneTN's post in the thread Need some help with Like Like.
    Here are the led status codes from the Yuneec H920 manual. What position is your flight mode selection switch (S4) ? Caution, I did a...
  • WTFDproject
    WTFDproject reacted to Enrico Jorysch's post in the thread H520e camera on a 520 with Love Love.
    The attempt failed. I have an X Connector adapter that I mounted on the H520. I connected an ETX thermal imaging camera and booted the...
  • WTFDproject
    WTFDproject reacted to Enrico Jorysch's post in the thread H520e camera on a 520 with Love Love.
    I'll give it a try and then let you know
  • WTFDproject
    WTFDproject reacted to h-elsner's post in the thread Need some help with Like Like.
    What H920 do you have? An old H920 or a H920+? If the motors start one after another then it is a H920. If the motors starting all at...
  • WTFDproject
    WTFDproject replied to the thread Need some help.
    The mention of "Calibrate" is kind of a great place to start. 1.) What kind of calibration did you do? Include the button names as well...
Show older items