Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Camera focus

Joined
Sep 27, 2021
Messages
7
Reaction score
2
Age
71
Hi, After lets say a less than perfect landing my camera front face had popped loose. I snapped it back into position all works well with the exception of focus. Anyone have a fix for this by firmware??
 
No firmware or software fix for that. It sounds like the sensor and lens alignment got displaced during the crash. Did the whole camera assembly pop out from the crash? Did you have to reinstall the cables for the camera and the servo motor?
 
No the front popped off and I just snapped it back in place. Sounds like I'm gonna have to pop it back apart and look carefully, to confirm nothing else is dislodged.
 
So the front of the camera module itself?9B07F5A4-D7D0-4036-9C11-21362C30554A.jpeg
At the line just below the latches.

If you cannot get the sensor and lens aligned the camera module can be purchased and replaced.
 
Last edited:
Now today she won't bind with the controller. Guess I migtha knocked the antenna wire loose. Oh well not tonight.
It was binding and flying yesterday. A bit nearsighted but it was operable.
 

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,587
Members
27,284
Latest member
csandoval