cannot choose Panoramic photo mode

JoePGM · Feb 19, 2017

Hey, I donno why I can't select the panoramic mode in my H....

I have all latest firmware installed on my H and ST16

Any idea?

Steve Carr · Feb 19, 2017

JoePGM said:
Hey, I donno why I can't select the panoramic mode in my H....

I have all latest firmware installed on my H and ST16

Any idea?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Have you tried it in the air? I haven't used it yet, but I'm wondering if single means a single series.

JoePGM · Feb 19, 2017

I have try that in air today morning during my flight and that doesn't work too.

CraigCam · Feb 19, 2017

Did you bind to the + version of the CGO3? And turned on advanced? Do you have the histogram?

Sent from my iPhone using Tapatalk Pro

JoePGM · Feb 19, 2017

I have bind the + version of CGO3, I have turn on advance, the histogram has no graph showing

I have try clearing the "Flight Model" data from my ST16 (exactly the procedure that we done during latest firmware update, which is setting>apps>flight model> clear). Rebind to my H and CGO3, still doesn't work

wedbster · Feb 19, 2017

JoePGM said:
I have try clearing the "Flight Model" data from my ST16 (exactly the procedure that we done during latest firmware update, which is setting>apps>flight model> clear). Rebind to my H and CGO3, still doesn't work

Same here, Camera:v3.2.26 (E) no panorama mode possible ...unknow error, but Camera:v3.2.26 (A) works

JoePGM · Feb 19, 2017

ah..... I fixed the issue! Have to say a thank you to CraigCam, your comments "histogram checking" remind me to find out the reason why my histogram shows nothing. It is due to CGO3 camera firmware out-of-date!

I have done all firmware update to my ST16 and H/CGO3 from new, however I sent my CGO3 to YuneecUK a few weeks before for gimble firmware upgrade due to wifi signal lost when landing gear retracts. After I get back the CGO3 I suppose all firmware are up-to-date however just find that they are not!

I now did a CGO3 firmware upgrade to latest, histogram comes back, panoramic mode comes back, great!

Steve Carr · Feb 20, 2017

The directions for the new camera functions are located in this pdf file:

http://download.yuneec.com/Typhoon_H/ST16/ST16_V3.1.25/ST16 Firmware Update Version B25 What's New.pdf?_ga=1.6734706.1122122693.1483768453

Dr Delta · Feb 20, 2017

Cool mode. Can anyone advise a good free panorama stitching program?

Thx!

JoePGM · Feb 20, 2017

Image Composite Editor - Microsoft Research

I have installed this one and will try it next time

Dr Delta · Feb 20, 2017

JoePGM said:
Image Composite Editor - Microsoft Research

Thank you. Looks good to me. Going to try as well, please let me know your results with it.
Hope we have good flying weather soon....drizzling rain and lots of wind now.

Hootz · Feb 20, 2017

Image Composite Editor works well to stitch multiple photos from the same aspect but doesn't work well for me with the photos the H takes at multi aspect (18 photo group). There were alignment errors that I could not fix. I tried PtGui (trial version) and it worked perfect the first time with the large photo group. Went the cheap route with Hugin (free - open source) and after a really frustrating period to figure it out got a 360 photo to work in Hugin very well. There is a learning curve like anything else.

JoePGM · Feb 20, 2017

Thank you for sharing tools tips, Hootz!

Dr Delta · Feb 21, 2017

Been fiddling around with ICE, the Microsoft prog. Good and easy interface and works very well for simple pano's.
Have tried Hugin before, but that's quite a challenge indeed.....

Cheers!

JoePGM · Feb 22, 2017

Dr Delta do you experience the same issue?

Image Composite Editor works well to stitch multiple photos from the same aspect but doesn't work well for me with the photos the H takes at multi aspect (18 photo group).